Automatic single-sided edge bander for the edge gluing with hot melt glue on straight panels, on the four panel sides, finishing and rounding-off of the panel corners
Base made of curved and welded steel plates to ensure a vibration free, highly rigid structure. Openings with shoots for the removal of shavings to the floor that are not collected by the dust extraction.
Top presser made of curved and welded steel plates and supported with steel columns. It provides a vibration free structure on which the operating groups are located.
Two rows of high-adherence rubber panel pressure wheels on the track and mounted on bearings. An enclosure covers the wheels.
Manual adjustment of presser at the machine's infeed with positioning numerical readout
Top operating groups fixed to the presser or mechanically connected on to it to allow the automatic positioning according to the panel thickness. Lower groups fixed to the horizontal beam for a precise reference with respect to the panel.
All high frequency motors are equipped with static inverter.
Safety enclosure on the entire length of the machine with poly-carbonate windows for the groups visualisation during machining.
2 doors for the access to the operating groups; the first one with the only electric interlocking for the gluing unit and the second one with electro-mechanical interlocking for the remaining groups.
Exhaust outlets for the operating groups positioned on the top side of the safety enclosure
Mobile control panel at machine infeed for an easy use from the operator''s working position
Electrical cabinet in conformity with the current safety regulations.
Electrical component positioned inside the base with door that allow an easy access in case of any maintenance operations.
OPERATING GROUPS:
olimpic k 560 composition "T-ER2" (40)
- The machine includes free spaces for the installation of the optional operating units as follows:
- "AUTOSET"
- "RT-V" pre-milling unit
- "VC-S4.1" gluing unit
- "K/SEL" end cutting unit
- "R-K" trimming unit
- "ROUND X" Rounding unit
- "RAS/K" edge scraping unit
- "AAR" anti-adhesive unit (621203)
- Spray-mist device for edge finishing (621261)
- Infrared ceramic lamp (621249)
- "iGLUE" kit for gluing unit (621271)
- "SGP" glue pot with manual dosing in substitution of the standard one (621559)
- RC-N glue scraping unit (621504)
- "SP-V" brushing unit (621353)
- Machine language: ENGLISH
- Security execution
ENERAL TECHNICAL DATA:
Variable track feed speed [m/min] : 12 to 18
- Panel thickness [mm] : 8 to 60
- Thickness of edges in strips [mm] : 0,4 - 6
- Thickness of rolled edges [mm] : 0,4 - 3
- Max. section of rolled edges [mm2] : 135
- Coil-holder plate diameter [mm] : 780
- Distance between two successive panels [mm] : 600
- Minimum panel length (100 mm min. width) [mm] : 140
- Min. length of edge in rolls [mm] : 180
- Min. length of edge in strips [mm] : 220
- Min. panel width (210 mm min. length) [mm] : 95 (60)*
* (60mm with unit adjustment modification)
- Opening for panel support roller [mm] : 560
- Worktable height [mm] : 900
TECHNICAL DATA "RT-V" pre-milling unit:
- Max. removal [mm2] : 55
- Max thickness removal [mm] : 3
- Panel thickness [mm] : 8-45 (60**)
- Motors power [kW] : 1,5
- Tool diameter [mm] : 100
- Tool height [mm] : 49
- Tool rotating speed [rpm] : 9
- ** with H="64mm" tools)
TECHNICAL DATA "VC-S4.1" gluing unit:
- Installed power [kW] : 3
- Heating time [min] : 12
- Glue pot capacity [Kg] : 1,5
TECHNICAL DATA "K/SEL" end cutting unit:
- Motors power [kW] : 0,35
- Max. speed of blades [rpm] : 12000
TECHNICAL DATA "R-K" trimming unit:
- Motors power [kW] : 0,55
- Speed of cutters [rpm] : 12000
- Minimum panel thickness with radius [mm] : 12
- Exceeding material to the panel thickness [mm] : 2+2
- Vertical/front copying devices : disc/pad
- Tool radius [mm] : 2
TECHNICAL DATA "ROUND X" Rounding unit:
- Motor power [kW] : 0,35
- Speed of cutters [rpm] : 12000
- Edge thickness [mm] : 0,4 - 3
- Panel thickness with a straight angle [mm] : 10 to 50
- Panel thickness with a shaped angle (according to the profile) [mm] : 10-30/40
- Min. panel length [mm] : 140
- Min. panel width [mm] : 100
- Max. working speed during rounding operation [m/min] : 12
- Max. working speed during only trimming operation [m/min] : 18
- Distance between two successive panels [mm] : 600
- Vertical/front copying devices : disc/pad
- Knives radius [mm] : 2
TECHNICAL DATA "RAS/K" edge scraping unit
- Minimum panel thickness [mm] : 12
- Vertical/front copying devices : disc/disc
- Tool radius [mm] : 2