FEATURES:
- Cast iron saw unit with lifting system by means of "dove-tail" guideways and tilting on side trunnions
- Anodized aluminium alloy carriage (dimensions 360 x 1600 mm) sliding on hardened steel guides, which are fixed
on the carriage by means of mechanical bending system
- Squaring frame (dimensions 1200 x 650 mm) complete with:
- telescopic fence with 2 flip-over stops
- eccentric clamp
- swinging arm support
- idle roller to facilitate the panel loading/unloading
- Dedicated saw parallel fence
- Dedicated surface planer fence (dimensions 1670 x 150 mm)
- Helicoidal thicknesser infeed roller
- Sandblasted steel thicknesser outfeed roller
- Scoring unit with independent motor complete with blade
- Cast iron mortiser
- 0-16 mm self-centering (Wescott type) chuck
- Xylent spiralknife cutterblock with 3 series of knives
- Xylent maintenance kit
- Bridge planer protection (standard for CE version)
- Spindle moulder fence with 3 controlled adjustments max. tool Dia. 240 mm
- Anodized aluminium tables for spindle moulder fence
- Tiltable spindle moulder 90? ? 45?
- Interchangeable spindle
- Spare spindle moulder each
TECHNICAl DATA:
PLANER :
- useful working width [mm] : 410
- cutter block diameter (mm)/n. : 87
- standard knives : 3
- standard knives dimensions [mm] : 410 x 30 x 3
- max. stock removal [mm] : 5
- surfacing tables total length [mm] : 2000
- thicknessing table dimensions [mm] : 423 x 775
- feed speed on thicknesser [m/min] : 6 / 12
- min. ? max. working height on thicknesser [mm] : 3 ? 230
CIRCULAR SAW :
- cast iron saw-spindle moulder worktable dimensions [mm] : 1250x430
- blades tilting : 90? ? 45?
- max. saw blade diameter with scoring blade installed [mm] : 315
- max. saw blade projection from table at 90?/45? [mm] : 100/71
- max. squaring stroke (standard)) [mm] : 2600
- cutting width on parallel fence [mm] : 1050
SPINDLE MOULDER :
- max. useful spindle length [mm] : 125*
- spindle moulder speeds (at 50 Hz) [rpm] : 3500/6000/8000/10.000
- max. tool diameter when profiling [mm] : 210
- max. diameter of tool lowered under the table at 90? [mm] : 240
OTHER TECHNICAL FEATURES :
- three-phase motors : 4kW (5,5hp) 50Hz
- exhaust outlets diameter [mm] : 120
- Spindle moulder available with following diameters : 30-32-35-40-50 mm 3/4" - 1" - 1 1/4"