Contractor Saw

CNS175-SFA30

30” RIP CAPACITY & ALUMINUM EXTRUSION FENCE
58 1/2″ W, 40″ D, 34 3/4″ H

CNS175-TGP36

36” RIP CAPACITY & T-GLIDE FENCE ASSEMBLY
69 1/8″ W, 45″ D, 34 3/4″ H

CNS175-TGP52

52” RIP CAPACITY & T-GLIDE FENCE ASSEMBLY
85 1/4″ W, 45″ D, 34 3/4″ H

Categories: ,

Description

INCLUDED WITH SAW

(2) STEEL EXTENSION WINGS
(1) MITER GAUGE
(1) MICRO BLADE GUARD
(1) RIVING KNIFE
(2) BLADE WRENCHES
(1) PUSH STICK
(1) 10” BLADE
(1) STANDARD BRAKE CARTRIDGE
(1) OWNER’S MANUAL
(1) ASSEMBLY INSTRUCTIONS
(2) HARDWARE PACKS
(1) 3MM HEX KEY
(1) 5MM HEX KEY
(1) 8MM HEX KEY
(1) BLADE SPACING ADJUSTMENT GAUGE

HIGH LEVEL SPECS

  • CABINET FOOTPRINT:
    25 3/4″ W X 27″ D
  • CAST IRON TABLE:
    20″ W X 27″ D
  • CAST IRON TABLE (W/ EXTENSION WINGS):
    44″ W X 27″ D (W/OPT. CAST IRON WINGS)
  • EXTENSION WINGS:
    12″ W X 27″ D EACH
  • EXTENSION TABLE 30 IN RAILS:
    N/A
  • EXTENSION TABLE 36 IN RAILS:
    23 3/4″ W X 27″ D
  • EXTENSION TABLE 52 IN RAILS:
    40 1/8″ W X 27″ D
  • SHIPPING DIMENSIONS (SAW BODY ONLY):
    35″ W X 30″ D X 20″ H
  • WEIGHTS – TABLE SAW ONLY:
    225 LBS
  • WEIGHTS – W/ 30 IN FENCE SYSTEMS:
    245 LBS
  • WEIGHTS – W/ 36 IN FENCE SYSTEMS:
    310 LBS
  • WEIGHTS – W/ 52 IN FENCE SYSTEMS:
    335 LBS
  • WEIGHTS – (OPTIONAL CAST IRON WINGS):
    35 LBS EACH
  • SHIPPING WEIGHT (APPROX.):
    240 LBS (TABLE SAW ONLY)
  • BLADE:
    40-TOOTH, PROF. GRADE, 5/8″ ARBOR
  • BLADE DIAMETER:
    10″
  • BLADE TILT:
    LEFT
  • BLADE KERF:
    0.118″ (3MM)
  • BLADE PLATE THICKNESS:
    0.078″ (2MM)
  • MAX. DEPTH OF CUT, BLADE AT 0º:
    3 1/8″
  • MAX. DEPTH OF CUT, BLADE AT 45º:
    2 1/4″
  • MAX. RIP, RIGHT OF BLADE – 30 IN:
    30 1/2″ (W/ 30″ RAILS)
  • MAX. RIP, RIGHT OF BLADE – 36 IN:
    36 1/2″ (W/ 36″ RAILS)
  • MAX. RIP, RIGHT OF BLADE – 52 IN:
    52 1/2″ (W/ 52″ RAILS)
  • MAX. RIP, LEFT OF BLADE:
    16 1/2″ (W/ 30″ STD. FENCE)
  • MAX. RIP, LEFT OF BLADE (OPTIONS):
    12 1/2″ (W/ T-GLIDE FENCE)
  • DADO DIAMETER:
    8″ (REQ. DADO BRAKE + INSERT)
  • DADO MAX. WIDTH:
    13/16″
  • ARBOR DIAMETER AT BLADE:
    5/8″
  • MAIN BEARING SIZE:
    62MM OD X 30MM ID
  • SECOND BEARING SIZE:
    52MM OD X 25MM ID
  • TABLE IN FRONT OF BLADE (MAX. ELEVATION):
    10 5/8″
  • TABLE BEHIND BLADE (MAX. 
  • ELEVATION):
    7 1/8″
  • ARBOR RUNOUT:
    0.001″ MAXIMUM ALLOWABLE RUNOUT
  • TABLE FLATNESS MEASURED DIAGONALLY:
    0.016″ MAXIMUM GAP
  • BLADE ALIGNMENT WITH MITER SLOT:
    0.010″ MAXIMUM DISPLACEMENT
  • DEVIATION OF MITER GAUGE INDEXING STOPS FROM ACTUAL:
    ±0.25º
  • ALIGNMENT BETWEEN SPLITTER AND BLADE:
    0.010″ MAXIMUM DIFFERENCE
  • MITER SLOTS T-SHAPED:
    3/4″ AT TOP, 1″ AT BOTTOM, 3/8″ DEEP
  • MITER SLOTS CENTER:
    11 1/8″ CENTER-TO-CENTER
  • MITER SLOTS INFO:
    5 1/2″ (ARBOR FLANGE TO CENTER OF RIGHT SLOT)
  • DUST COLLECTION PORT DIAMETER:
    4″ UNDER TABLE TOP
  • RIVING KNIFE / SPLITTER THICKNESS:
    0.090″ (2.3 MM)
  • MICRO BLADE GUARD (STANDARD ON 1.75 HP SAWS):
    POLYCARBONATE, EXTENDS 1″ RIGHT OF BLADE
  • DUST COLLECTION BLADE GUARD (STANDARD ON 3 HP SAWS)(OPTIONAL ON 1.75 HP SAWS):
    POLYCARBONATE, EXTENDS 1-3/16″ RIGHT OF BLADE
  • BLADE GUARD (DUST COLLECTION) PORT DIAMETER:
    1-1/2″ OUTSIDE, 1-1/4″ INSIDE
  • INSERT:
    ZERO CLEARANCE, PHENOLIC CORE, MELAMINE SURFACES
  • HAND WHEELS:
    6″ DIAMETER, CAST ALUM. W/ ABS HANDLE
  • BELTS:
    V-RIBBED BELT – STATIC DISSIPATIVE
  • OVERALL SAW DIMENSIONS:
    44″ W X 39 1/4″ D X 34 3/4″ H (BODY ONLY)
  • OVERALL SAW DIMENSIONS 30 IN:
    58 1/2″ W X 40″ D X 34 3/4″ H
  • OVERALL SAW DIMENSIONS 36 IN:
    69 1/8″ W X 45″ D X 34 3/4″ H
  • OVERALL SAW DIMENSIONS 52 IN:
    85 1/4″ W X 45″ D X 34 3/4″ H
  • MOTOR CONFIGURATION 1:
    CNS175: 1.75 HP, 120V, 14 A
  • MOTOR CONFIGURATION 2:
    (USER CONFIG. TO 220V W/OPTIONAL KIT)
  • MOTOR CONFIGURATION 3:
    N/A
  • MOTOR CONFIGURATION 4:
    N/A
  • MOTOR CONFIGURATION 5:
    N/A
  • MOTOR CONFIGURATION 6:
    N/A
  • MOTOR CONFIGURATION 7:
    N/A
  • MOTOR CONFIGURATION 8:
    N/A

Video