Excellent finishing results are obtained when machining raw and painted panels thanks to the wide range of units (Cross-Belt, Calibrating Roller, Sanding Roller, Super-Finisher) that come with the Eurosystem, and to its prescribed approach: a perfect combination of aggressive roller with sensitive EPICS electronic sectional pad.
dmc eurosystem
Description
Technical Details
Working width | mm | 1350 |
Min/max working thickness (mobile table) | mm | 3-170 |
Min/max working thickness (constant pass-line) | mm | 3-200 |
Abrasive belt width (roller unit) | mm | 1370×2620 |
Abrasive belt length (roller unit) | mm | 150×5000 |
Mat feed speed | m/min | 3-18 |
Advantages

Superfinishing unit: for sanding at the highest level
Uniform finish with the Chevron belt which improves the cooling of the abrasive action on the work piece, the wide contact surface and the copying capacity of the “MESAR” electronic pad. The unit is particularly suitable for the superfinishing of solid wood components, MDF panels that have been laminated, veneered or painted (opaque and polished).

Integrated electro-fan provides extreme compactness.
Reduced overall dimensions and noise emissions with the device positioned under the work table.

“Mesar” sectional pad: the best finish with any material. Higher quality results due to the special shape of the sectors that allows the operator to intervene “softly” but also in an “aggressive” way, simply by varying the working pressure. The setting of the pad position and the possibility of using foils of different thickness increases its versality.