balestrini cube

balestrini cube’s operating heads work as two independent 5-axis machining centres, performing a wide range of operations on the work piece in a very short time. The innovative machine structure, equipped with independent strokes, allows both working units to process the work piece at the same time, without overlapping or limitations.

Description

Technical Details

AXES X-Y-Z axes speed 80 – 80 – 80 m/min
AXES STROKES UPPER WORKING UNIT X
Y
Z
C
A
4100 mm
800 mm
860 mm
+ / – 370°
360 ° Cont.
AXES STROKES REAR WORKING UNIT U
V
W
D
B
3600 mm
800 mm
860 mm
+ / – 370°
360 ° Cont.
WORKTABLE STROKES P
Q
1920 mm
1920 mm
WORKING UNITS:

ELECTROSPINDLES 24000 RPM – LIQUID COOLING

X34

at 5 axes with tool change

No 1×9,5 kW + No. 2×4 kW

No. 1×12 kW

MAXIMUM WORKABLE VOLUME LAVORABILE On one single worktable
With the two paired worktables
300 x 300 x 1500 mm
300 x 300 x 3000 mm
OPTIONS Double loader
Throughfeed loader
Single or double handling device

Advantages

TWO MACHINING CENTERS IN ONE
Two multi-function operating heads perform machining/ handling of the work piece and the positioning of the worktables.

SYNCHRONIZATION OF THE OPERATING HEADS
The movements of the two operating heads are synchronized by NC to allow them to overlap during work piece machining.

WORKING UNIT X34
Working unit revolver with 4 outlets and 3 electrospindles (no. 1 x 9,5 kW, no. 2 x 4 kW).

WORK PIECE LOCKING EQUIPMENT
JIG FREE worktables with automatic positioning and carried in X,Y and Z.