minimax fs 41e

Surfacing-thicknessing planer

Surfacing-thicknessing machine for the demanding craftsmen and carpentries, for a high-flexible production with an “elite” finishing.
Discover the “Xylent” cutterhead, available for this machine.

Description

Advantages

Planing fence
The fs 41e uses a dedicated planing fence extremely rigid and smooth, thanks to a support with central round bar.

Perfect finishing 
The planer unit stands on cast iron supports and the standard version has a 87 mm diameter cutter block with 3 knives. (The optional “Tersa” cutter block is available with 4 quick tightening knives and automatic adjustment). For an impeccable finish, the pressureof the thicknesser feed rollers can be adjusted according to the type of wood machined. The infeed roller has a helicoidal profile to guarantee firm and constant work piece feed, while the outfeed roller, in sandblasted steel, maintains the perfect post-processing finishing.

Exceptional finish with the “Xylent” spiral knife (3 spiral knives)
Reduced noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.

Technical Details

fs 41e    
Cutterhead working width mm / inches 410 / 16
With TERSA Straight-knife Cutterhead:
Cutterblock diameter / no° of standard knives
Dimension of standard knives
mm / n°
mm
87 / 3
410 x 30 x 3
With XYLENT Spiral helical Cutterhead: Cutterblock diameter / no° of standard knives
Dimension of standard knives
mm / n°
mm
87 / 66
15 x 15 x 2.5
Max. stock removal mm 5
Jointer table length mm / inches 2200 / 79
Planer table dimensions mm / inches 423 x 775 / 16.65 x 30.5
Planer feed speeds m/min 6 / 12
Min. – max. planer working height mm / inches 3 – 230 / 0.12 – 9
Single-phase motor Hp 4.8
Fence Tilt degrees 0 – 45

Videos

Documentation