Compact, versatile four-sided planer/moulder with 4 cutting heads, 5 individual motors, 10 1/4” wide x 4” high four-sided planing/moulding capacity, 7 – 47 fpm variable power feed, and 7,200 rpm spindle speed.
Description
MP260 Planer Standard Features
Centralized Control Panel
Allows the operator to start and stop all four cutter and power feed motors separately.
Easy-to-change Knife Profiles
Changing knives is simple and takes approximately 10 to 20 minutes which makes the production of small quantities of custom material more efficient and profitable.
Five Feed Rollers
Four steel and one rubber power roller steadily move the board through the machine to ensure a consistent profile from end to end even with uneven boards.
Variable Feed Rate
Is adjustable from 7 – 47 ft/minute (2.5-14 m/minute) for 60 Hz to efficiently process both softwood and hardwood material.
Adjustable Table Height
The table height is easily adjusted with a manual hand crank to precisely position the material before entering the machine.
Heavy-duty Construction
Built to last with a heavy-duty cast-iron table, durable sheet steel chassis, and premium components.
4 Cutting Heads
Plane and mould boards on all four sides in a single pass into a variety of finished products.
Multiple Extraction Points
Located near the cutters connect with your chip extraction system to keep chips from building up in the machine.
Large Viewing Window
Allows the operator to supervise the entire cutting process from rough sawn boards to final products.
Machine Dimensions
Specification
- Capacity
4 Sided Planing/Moulding | Max. Width – 10 1/4″ (260mm) Height – 7/16″ – 4″ (10-100mm) |
2 Sided Planing/Moulding | Max. Width – 11 13/16″ (300mm) Height – 7/16″ – 9″ (10-230mm) |
1 Sided Planing/Moulding | Max. Width – 16″ (410mm) Height – 9″ (230mm) |
- Upper Horizontal Cutter
Diameter | 2 7/8″ (72mm) |
Width | 16 1/8″ (410mm) |
Power | 5.5 HP (4kW) |
Speed | 7200 rpm 60 Hz / 6000 rpm 50 Hz |
Max Cutting Depth | 5/16″ (8mm) |
Max Profile Depth | 3/4″ (20mm) |
- Lower Horizontal Cutter
Diameter | 2 7/8″ (72mm) |
Width | 11 13/16″ (300mm) |
Power | 4 HP (3kW) |
Speed | 7200 rpm 60 Hz / 6000 rpm 50 Hz |
Cutting Depth | 0 – 5/16″ (0-8mm) |
Max Profile Depth | 1/2″ (15mm) |
- Vertical Cutters
Spindle Diameter | 1 3/16″ (30mm) |
Max Cutter Height | 3 15/16″ (100mm) |
Max Diameter | 5 1/2″ (140mm) |
Power | 4 HP (3 kW) |
Rotation Speed | 6000 rpm |
Max Cutting Depth | 1 3/16″ (30mm) |
- Standard Planing Knives Included
Type | TB90 steelz fzb |
Diameter Head | 3 9/16″ (90 mm) |
Height Head | 1 9/16″ (40 mm) |
Knife Type | HSS |
Knife Width | 2″ (50 mm) |
- Power Feed
Power | 0.5 HP (0.37 kW) |
Feed Speed | 7-47 ft/min (2.5-14 m/min) 6-39 ft/min (2-12 m/min) |
- Electrical
Total Power | 18 HP (13.4 kW) |
Connection | 3Ph 400V, 50-60 Hz, 20A 3Ph 230V, 50-60Hz, 20A 1Ph 230V, 60Hz, 50A |