Scm Automatic Edgebander Me 20-CE

- Machine frame made of steel, single-block base to guarantee an excellent support for the operating units

- Friction-free worktable with n.3 rollers

- Panel-to-use in any working conditions

- Panel feed by means of a top feeder with high-adherence toothed belt with steel cables inside

- Feeder manual lifting with positioning of all operating units synchronised with the feeder and based on the panel 

  height

- Numeric readout of the selected panel

- Telescopic front support with rollers for all the machine length

- Anodized aluminium outfeed fence

- Glue smokes specific exhaust outlet; centralized exhaust outlet of the other dusts

- Hot melt glue with quick heat up system and internally teflon coated to allow an easy glue replacement

- Glue application on the panel by means of glue spreading roller

- Temperature adjustment of the applied glue integrated in the PLC control

- Device for automatic recovery of unused glue

- Automatic edge loading system for rolled edges with shear device for 2 mm max. thickness edges

- Coil holder plate, 730 mm diameter

- Pressing unit with n. 2 edge pressure rollers: one in steel and the second rubber coated

- Adjustable infeed fence with numeric readout of the edge thickness

- Automatic lowering of the glue pot temperature after a temporary machine non-use

End cutting unit for the cut at 90 deg. on the leading and trailing edges of the panel. Possibility to exclude the unit through PLC.

- Equipped with vertical copying pads for an accurate positioning of tools with  reference to the cutting point.

- The unit is provided with 72 mm diameter, combined cutters: the radius part of the cutter is used to trim 2 mm radius 

   edges and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5 

   mm. Changing from radius edge to edge in wood is done easily moving the cutters axially. The edge thickness is 

   shown by 2 numeric readouts.

- Worktable dimensions [mm] : 1950 x 180

- Worktable height [mm] : 904

- Thickness of rolled edges [mm] : 0,4 - 2

- Max. thickness of edges in strips [mm] : 5

- Min. - max. working height [mm] : 12 - 50

- Min. panel length/width with rolled edges [mm] : 180/65

- Min. panel length (frontal end cutting only) [mm] : 120

- Feed motor power S1 [kW] : 0,25

- Feed speed [m/min] : 6

- Pneumatic operating pressure [bar] : 6,5

- Operating temperature [deg.] : 190

- Exhaust outlet diameter (base) [mm]  : 120

- Exhaust outlet diameter (glue pot) [mm]  : 60

- Motor power S1 [kW] : 0,18

- Glue capacity [kg] : 0,5

- Motor power S1 [kW] : 0,55

- Widia cutters : Dia. 75 mm Z4

- Cutters rotation speed [rpm] : 12.000

- Safety enclosure

- Electrical cabinet with PLC, padlockable main switch and overload protection

- Emergency pushbutton