>Moulding
  • TECHNICAL DATA: ? Maximum length of job : 2440mm ? Minimum length of job : 300mm ? Job thickness range : 16mm to 125mm ? Minimum job width : 150mm ? Maximum heating temp. : 200?c ? Air pressure : 7kg/Cm2 ? Heating element : 1.5 Kw ? Electric motor-3phase : 0.5HP ? Control type : PLC fully Automatic SILENT FEATURES : - PLC control panel which has a capacity of 15 job programmes. - Special pneumatic gauge is operated by 2 pneumatic cylinders for repetitive jobs settings. - 8 pneumatic cylinders to apply uniform pressure on job through forming heater bar assy. For effective bonding of laminate. - Long life heater bar ground and hardened. - Back stops facility. - Possibility to laminate more than one small board. - Automatic post forming cycle with variable heating time, stop and go time and holding time can be adjusted to profile. - Drive motor with brake is provided to avoid slippage of rotary part. - Motion of the heater bar. - Mechanical drive control by limit switch. "- Gauge stopper : Special pneumatic gauge stopper with 2 cylinder for repetative jobs setting. Gauge stopper with sensor for auto job profile" "- Pressure Clamp : Pressure clamp with 3 pneumatic cylinder for proper job grip. soft cotton on pressure clamp for better grip & to avoid job damage." "- PLC Controller : Easy to operate , 15 job programmes , Manual & auto control"
  • Work Table Size-29?x29? Spindle Diameter-1 ?? Up & Down Movement-5? Spindle Speed (RPM)-5000 Power Required HP/RPM-3/2800 Approx. weight Of Machine Kg.-310
  • TECHNICAL DATA: ? Fix table size : 863x455mm ? Sliding table size : 1000x375mm ? Degree : 45? ? Up and down movement of spindles : 100mm ? maximum moulding block width : 100mm ? Electric motor : 3 HP/2800rpm SILENT FEATURES : - Aluminum sliding table. - Ground & electronically balanced spindle for vibration free operation. - Easy & convenient locking system of spindle shaft. - Clamping for tenoning work. - 90?-45? of spindle for work pieces - Feeder can be fitted on spindle moulder for auto feed of work piece
  • TILTING SPINDLE MOULDER FORWARD TILT - dimension of working table:900x1300mm - table height:910mm - opening diameter of table cup:360mm - working depth of the table cup:95mm - spindle vertical stroke: 250mm - tilting spindle:-10~ +45 degree - motor:7.5HP - 5 spindle speeds:3000/4000/6000/8000/10000rpm - 40mm interchangeable spindle - spindle rotation: forward and reverse - max. tool diameter: below table 320mm, above table 335mm - collet chuck acceptable - mitre gauge, extension bar, hold down device - 2-mechanical-position-indicator fence assembly - FA-03 for straight work - Digital position indicator for indicating spindle height - Digital position indicator for indicating spindle tilting degree
  • TILTING SPINDLE MOULDER FORWARD TILT - dimension of working table:900x1300mm - table height:910mm - opening diameter of table cup:360mm - working depth of the table cup:95mm - spindle vertical stroke: 250mm - tilting spindle:-10~ +45 degree - motor:10HP - 5 spindle speeds:3000/4000/6000/8000/10000rpm - 40mm interchangeable spindle - spindle rotation: forward and reverse - max. tool diameter: below table 320mm, above table 335mm - collet chuck acceptable - mitre gauge, extension bar, hold down device - 2-mechanical-position-indicator fence assembly - FA-03 for straight work - Digital position indicator for indicating spindle height - Digital position indicator for indicating spindle tilting degree
  • TECHNICAL SPECIFICATIONS: - MOTOR: 7.5HP/3P - TABLE SIZE: 1050x800mm - W/MECHANICAL BRAKE - SPINDLE SIZE: 30mm - 420V/50C/3P
  • Max. Workpiece length - 2400 mm Max. Workpiece length (Recommended) - 600 mm Min. Workpiece width - 160 mm Max. Workpiece thickness - 100 mm Min. Workpiece length - 16 mm Connected load - 3 KW Electric Supply - 3 Phase 415V AC other voltages optional Compressed Air Requirement - 30 LPM at 6 bar
  • Along with Feeder Arragement TECHNICAL DATA - Fix Table Size : 865mm x 548mm - Sliding Table Size :1300 x 315mm - Spindle Dia. : 30mm - Spindle Speed : 5000/7000/9000RPM - Spindle Tilt : 45 Deg C - Spindle Movement : 100mm - Max Molding Block Width : 100mm - Dust Collecting pot Dia. : 100mm - Power : 5 HP
  • The “formula feeders” with 4 and 3 rollers are a necessary device for the spindle moulder of all modern woodworking workshops . Thanks to the 8 feed speeds and the strong structure guarantee precision and safety at the highest levels
  • Spindle moulder with fixed spindle

    Versatility and ease of use of the spindle moulders, ideal for DIY woodworkers and craftsmen.