Every industry i.e. Dyeing Printing, Chemical Industries, Medicine Manufacturers, Hospitals, Garages etc. all are in need of Air Compressors for Air pressure & they want advanced technology & reliable services at Low-maintenance & trouble-free performance. Fouji gives all the expected performance with their 40 years of experience.
"FOUJI" Air Compressors have been proving their superiority in design and durability for many years by nation-wide customers. All Fouji products are manufactured under quality control, and by their top level designs they are assured of wonderful precision, construction, easy operation and solidity. Besides, they have proved through the minute inspection their accuracy and long durability. Fouji Air Compressors are available through Caple Traders, Malad.
Applications
Used in wide ranges from painting (Ships, Rolling Stock, Machinery & Small Tools, Furnitures & Building Fixtures). Air filling, Forging water Pumping Agitating, Measuring power, Air Brakes, liquid sprinkling, Blowering to other Air SFoujices for Cooling.
The price of "Fouji" air compressor is very competitive as compared to other brand without compromising on quailty.
Fouji Manufactures Air Compressors used for various applications in industry, with more than 40 years of experience in tyre inflating, sparing, dentistry using advanced technology to give you reliable service, low maintenance & trouble-free performance for years.
Tips to avoid downtime
Tension of the V-belt to be checked up every week.
Starter's Amp. calibration should agree to the Electric motor.
Connect the Electric motor to the required mains properly and observe safety measures.
Electric motor (rotation) must run anticlockwise as per arrow direction.
Adjust the Automatic pressure switch and safety valve equally and to the required pressure.
Check up the firmness of the fasteners (bolts and nuts) periodically to avoid loosening and vibration
Do not run the compressor without oil up to the required level.
SOME USEFUL SUGGESTIONS
(A) Lubrication is most important in reciprocating compressors. Use lubricating oil D. T. E. Oil heavy medium or D. T. E. Oil extra heavy duty of standard Vacuum Co. Oil as good as those mentioned above or oils which set free few carbon are suitable. But we have to change thickness of oil we use according to room temperature or season. For instance in summer, it is better to use thicker oil. When it is hard to get ideal lubrication oil, we often use automobile oil as substitute, namely, in summer No. 30 auto-oil and in winter No. 40. The quantity of oil in crank-case is proper when oil level goes up to the half point of the gauge. When oil becomes dirty, strain it or change it with new one.
(B) Adjust stretch of belt. When two belts are used, stretch of both must be same. When stretch of two belts are not same, electric motor might be overloaded. When belt becomes too long, pull motor back and make belt tight.
(C) Direction of revolution must follow arrow direction on cylinder pulley. When it turns in the opposite direction, feathers of pulley will not work for cooling air and temperature of the compressor may rise.
(D) Disassemble and clean suction filter frequently, and take care that no dust enters the cylinder. Disassembling & Cleaning must be done carefully; especially dust must be removed completely. Careless or rough "disassembling & cleaning" makes machine worse.
(E) If you hear queer noise on machine, stop running the machine at once examine obstacles and repair it.
(F) Monitor Pressure Gauge regularly. Examine if pressure gauge has any trouble or not. Sometimes you believe that pressure doesn’t go up because of some trouble on machine while not knowing breakdown of gauge.
(G) Once in two or three days loosen drain cock which is on the lower part of tank and run machine to drain, give a little pressure in tank. Keep carefully the certificate for proof-pressure of tank.
(H) Keep machine on a level and proper floor when in use for less vibration. Fixed machine gives less vibration when in drive.
(I) Pay attention if voltage drops. Sometimes motor causes trouble when you run machine in spite of voltage - drop.
