Caple Traders  
Home Profile Products Video Events Search Reach Us
Products
(Manual) Edge Trimmer J-3003
Application & Salient Features:
    This unique machine is a complement machine to an Edge Bander, and it is designed to trim and buff both upper and lower edges on straight panels and then pneumatically cut to give a sized and smooth banding on the edges of the straight panel. The machine is also suitable for radius trimming when equipped with radius tools. The versatile nature of the machine allows differential trimming and/or buffing to be carried out either on top or bottom face of the panel or on the both panel faces.

  • A large working table with hylum surface for easier and frictionless sliding of work-piece.
  • An elegantly designed cover which houses the trimming & buffing mechanism
  • A pneumatic cutter for cutting excessive band length after trimming & buffing
  • A user friendly electro-pneumatic control panel
  • Easy adjustment of trimming and buffing spindle
  • Guided bearings on sliding mechanism for setting of cutters with reference to work-piece.
  • Dust chute on machine

Click Here to Download

   
Work table for end-cutting of edges with hylum surface, makes an operator's functioning easy.
   
The spindle mechanism along with the trimming cutters & buffing wheels
   
A pneumatic cutter for cutting excessive band length after trimming & buffing
   
The control panel has various options and is user-friendly to operate the machine depending on the customer's requirement. In case the buffing is not required or only the top edge has to be trimmed and buffed, the various control buttons on the panel can be used for the operating options.
   
The trimming spindles can be adjusted in height (vertically) whereas the buffing spindle can be adjusted in height as well as laterally. This ability to adjust the spindles in vertical direction enables the setting of the cutters and buffing wheel with respect to the working thickness of the work-piece. The horizontal adjustment is provided on the spindle of buffing wheel, which helps in adjusting the cutting plane of buffing wheel, so that the buffing wheel can be adjusted to give maximum operating life. This setting ensures the trimming and buffing of top and bottom edge of banding strip in one pass on straight panels.
   
Technical Specification:
Sr.No. Specifications Unit Technical Parameters
1 Main Table size mm 1200x730
Trimming Unit
2 Work piece thickness range mm 10-38
3 Maximum trimming thickness mm 3
4 Maximum Diameter of Cutter mm 75
5 Spindle Speed rpm 12,000
6 Lateral movement of upper cutter mm 3
7 Total Power hp 0.33 x 2
Buffing Unit
8 Work piece Thickness Range mm 10-38
9 Max. Diameter of buffing Wheel mm 200
10 Maximum width of buffing wheel mm 25
11 Lateral movement of spindle mm 20
12 Spindle Speed rpm 1400
13 Total Power hp 0.5 x 2
End Cutting Unit
14 Table Size mm 500 x 550
15 Maximum cutting thickness mm 3
16 Maximum width of work piece mm 10-70
17 Compressed air requirement mm 0.5/7.0
Other Specifications
18 Diameter of dust extraction port mm 100
19 Machine dimensions (LxBxH) mm 1670 x 800 x 1350
20 Approx.net wt.of machine kg 350
 

Consultancy • Supplies • Service
© 2009. Caple Traders. All Rights Reserved